NA-320A

Nice little antenna for my Anytone DMR HT. Works good and stays out of the way. My DMR repeater is literally just a few miles away from my house, so I was not looking for a hi-gain antenna l, since my that HT is always in my shack. Fits my needs perfectly. I have other better gain antennas if I ever needed to take it out. If you have a in the shack HT, I would highly recommend this antenna!

Shorter than regular 771 antennas and more flexible as well. Great quality and works better than the shipped antennas on Baofengs, Tidradios, Radtel, and similar radios. It installs directly to the radio. Excellent product for the cost. I recommend this antenna.

Genuine Nagoya antenna from a trusted company like Btech. Everything I buy from Btech is genuine and performs the way it should. I noticed the reception improvement immediately from my Nagoya purchase. Great antenna value and reasonable pricing from an economic perspective, performance value unquestionable! Great design and compatibility with for all my HT needs.

It's much better than the stock antenna that came with my radio. However, just because it advertises UHF, doesn't mean it does UHF well. I measured over 3 on the SWR meter on 440, which is not ideal. Great on 2 meters. My other Nagoya antenna (771) does great on 440. If you don't mind a longer antenna, go for the 771 instead.

I got a couple of these since they come highly recommended online to improve performance of my Baofeng DMR handheld. I do notice slight improvement in reception of the weather service channel. Transmitting from difficult terrain, I'm not hitting repeaters that I wasn't before, but they do sound much cleaner. These antennas install very easy, and they're perfectly compatible with my radios. They are flexible and seem well-made. Worth the money.

From what i can tell, this antenna is well made and works as promised. I don't have a non-retractable antenna to compare it to, but any research on the matter says they are equal. Just make sure not to transmit with the antenna retracted. I had two issues. One, the rubber spacer was missing from my shipment (I didn't need it, but may with another radio in the future), and two, it didn't fit the radio I got it for (BaoFeng GT-3TP). Thankfully I have one of the UV-5R series which it fit just fine. Amazon wanted to send me a replacement antenna and return this one. That seemed wasteful so I contacted the seller on their sit to ask if they could just send the spacer, and to ask them to correct the description regarding the GT-3TP; as the seller said it was compatible with ALL baofeng models both on Amazon and on their website. The seller "Katy" was rude and unprofessional I felt (and maybe I was a little in hindsight?) Our correspondence is as follows: Me: "I bought the Nagoya NA-771R antenna from you through Amazon. It did not come with the rubber spacer that was supposed to be included. Even worse it does not fit my Baofeng radio. Both your website and Amazon state that the NA-771 and 771R work on ALL Baofeng models. I have a GT-3TP that it absolutely does not fit. The antenna base is too wide and will not even allow the antenna to even start threading on. I also have a UV-5RV2+, which it DOES fit, so I am not going to return the antenna since it can still be used, but I wanted it for the GT-3TP which transmits at 8 watts, giving me the best possible distance out of the radios I own. First I would like to know, can you send me the rubber spacer to complete my order? Amazon wants to send me a whole new antenna and have me return the one I got just to get a tiny piece of rubber out to me. I'd rather not waste your money or resources when it can be thrown in an envelope in regular mail. Second, do you HAVE an antenna that will fit my GT-3TP? Or some kind of adapter/extension? It seems that the GT series is the red-headed-stepchild of BAOFENG radios. Its hard to find any of the accessories, and I don't even think they are being manufactured anymore. But I own it already and it's the most powerful unit I have. I bought both radios years ago wanting to get into HAM radio and haven't even got to put them through their paces yet since I'm just now finally getting around to getting my license. I'd rather not have to buy another radio just yet. Third, since apparently the 771 won't work with the GT-3TP, would you please correct your website, and the Amazon product page for the NA-771 and NA-771R so other people aren't misled into purchasing an antenna that doesn't fit? Thanks, ****** (me)" Response: "The GT-3 was designed by a distributor (radioddity) who has decided to make it incompatible with all UV-5R accessories and aftermarket products We would suggest that you complain also to this distributor to why they decided to make it incompatible with standard SMA accessories Katy" This was of course, very unsatisfying and struck a nerve. I replied: "Katy, Thank you for telling me it's somehow radioddity's fault that YOUR product description meant ALL BaoFeng models, EXCEPT for the radios that are branded all over as BaoFeng, but happened to be designed by the distributor radioddity. However, it doesn't change the fact that it could easily be noted in your compatibility listing that it (and all radioddity?) models will not work with the product you are selling. The GT3-TP DOES say BAOFENG right on the front while not seeing radioddity anywhere (at least on the outside). Now, if you're done pointing fingers and placing blame elsewhere, I'd appreciate it if you would be so kind as to read the remainder of my polite (I thought) email to address my other questions. After all, I did take the time to be clear that I was still keeping the antenna, since it IS still of use to me. I'll even remind you so you don't have to look search for everything you ignored. I will assume you don't sell anything for the GT3, based on your somewhat childish, yet exceedingly unSUPPORTive response... I['d] simply like to know if you can send me the rubber spacer that was supposed to be included... unless THAT is radioddity's fault as well. 🙄 If not, I will simply return the antenna to Amazon after they send a whole new antenna (WITH spacer). I was just trying to save BaoFeng Tech and/or Amazon some money on shipping (no good deed, right?). I feel it might also help if I remind you "WHO YOU ARE". This is copied from your website's home page: BEGIN QUOTE ... [I formatted text for emphasis, which isn't supported here as far as I can tell, but it's in the email] WHO WE ARE: We not only sell BaoFeng, but we have taken the time to improve BaoFeng for everyone. When you buy through BaoFeng Tech, you are supporting new radios and advancements from the affordable radio movement. From testing BaoFeng radios and fixing bugs to preparing the user's guide - we pay attention to every single detail. We are the only BaoFeng distributor who supports all of our products directly. We take pride in what we sell, we know our products, and we are licensed radio operators. We don't just market radios, but we believe in and use our radios! END QUOTE So, please show how much YOU KNOW YOUR PRODUCTS and pay attention to THE DETAIL that your antenna, which YOU SUPPORT DIRECTLY, does not fit SOME BaoFeng radios, therefore not ALL MODELS. Since you TAKE PRIDE IN what you sell, I have every confidence that BaoFeng Tech will want to make sure to add the couple words required to prevent customers from falling prey to the evil distributor that is radioddity ever again! Furthermore, I'm also pretty sure that BaoFeng Tech will definitely want to get me the spacer that was left out of my purchase either directly or through Amazon. Don't worry, I'm sure it was an accident, with how much PRIDE YOU TAKE in what you sell. No hard feelings here. I apologize if my language or tone of voice in this email upsets you in any way. I tried to make sure my response didn't upset you any more than how upset I was from your response to my initial outreach for support. Especially considering how many, like me, may be JUST getting into amateur radio, and might not know that all BaoFeng radios are NOT created equal, nor is there one antenna to rule them all. Thankfully, you have made me aware, and if this foray into amateur radio continues to hold my interest... I will be sure to try and find out if the radio I am about to buy was actually designed by a distributor who, rather rudely, purposely designed it so that that particular model is as incompatible as possible with any aftermarket accessories I might like to get for it, and punish them by not giving them my business. Your soon to be BIGGEST fan, ****** (Me)" Katy never responded.... I don't tell you this to steer you from baofeng tech's products. Amazon took care of the issue for me and was extremely helpful. This is to tell others that the GT-3TP (and the whole GT series?) Isn't compatible like they said it was, to avoid dealing with them directly if possible, and a little to shame their customer "support". They still make great products in my experience, and do not regret my purchases. In fact, I will likely purchase more products from them, just not DIRECTLY from them. 😁

It fits and it works a whole lot better than the little rubber antenna that the radio shiped with. Item arrived on schedule I'm quite happy with the antenna and purchase experience.

Good reception and transmitting range, way better than standard antenna.

Excelente calidad y señal, muy recomendable

Pessima ricezione

The Original!

Kort maar met een redelijk range.

Buen producto relación calidad precio.